We deliver the sawn timber as quickly as possible, taking into consideration global challenges. Over the years we have developed an effective logistical system and we organize the whole supply chain to the destination country.
Mainly the sawn timber is shipped via waterways from Finnish harbors. The timber is either loaded into shipping containers or directly into the ship.
We mainly supply sawn timber made from Finnish pine and spruce to Africa, Saudi Arabia, China and Japan.
In addition to sawn timber we deliver birch, spruce and pine logs and plywood to our customers.
Finnish sawn timber is produces according to the Nordic Timber Grading rules –quality standards.
The size, number and location of the branches are the most important criteria in determining the quality classes.
When sorting the timber all sides are checked separately. The quality is determined by the edges and sides. The moisture content of the exported sawn timber is 20 % ±4 %.
US is the best sawtimber quality there is. It is used on: Carpetry products that reguire excellent apperance, window and doorframes, furniture, glue boards, frame structure, roof trusses, holding structures, interior panels, batten strips, floors, boat building, handicraft and ornaments.
V-quality is the second best sawn timber quality there is. It is used on: Window and doorframes, furniture, glue boards, frame structure, roof trusses, holding structures, exrior lining, slating, floors, subfloor structures and fences.
VI-quality is the third best sawn timber quality there is. It is used on: Furniture, glue boards, frame structure, roof trusses, holding structures, slating, subfloor structures, rough-tongue-and-groove boards, fences, concrete moulds, pallets and packaging.
VII-quality s the lowest quality, it can hold any faults on it. It just have to stay together as one piece. It’s is used on: subfloor structure, concrete moduls, disposable packing pallets and packing.
Schaalboards are side yields which have 75–125 millimeter width and standard thickness.
• Export schaalboards must have at least 25 percent wide sawn surface in both each edge and
the outside face of the board. This must be on the whole length of the board.
• For domestic schaalboards the sawn surface must be 85 percent of the whole length of the
outside face of the board.
Length (meters)
2,7-6
Strength (millimeters)
19 / 22 / 25 / 32 / 38 / 44 / 47 / 50 / 63 / 75
Width (millimeters)
100 / 125 / 150 / 175 / 200 / 225 / 250
Are you about to order Finnish sawn timber?
Let’s work together – we deliver high quality sawn timber reliably!
Nordpine Oy
+358 962 5623
info@nordpine.fi
© Nordpine Oy 2021
